MS1199VA00BK 0-10BAR MS1108VA00BK0000 0-16BAR 24V 0.4A Specifications General Measuring range Nominal pressure Max. pressure Perm. ambient temperature Perm. media temperature Degree of protection Mounting position Accuracy Adjustment of zero point Measuring System Measuring ranges ≤ 16 bar Measuring range 0-25 bar Switching Points Output contacts Setting of switching points Switching hysteresis Load / contact Electrical Connection Pressure Connection Materials Pressure chamber Measuring diaphragm Materials, media Materials, housing Weight Approval CE marking Mounting 0 ... 400 mbar up to 0 ... 25 bar (s. Ordering Code) 25 bar overpressure proof to nominal pressure (all measuring ranges), safe against negative pressure -10 ... +70°C 70°C IP54 per DIN EN 60529 vertical, pressure port downward (rear) ± 1.6% FS located in the dial diaphragm measuring system, diaphragm of reinforced elastomere diaphragm measuring system, diaphragm of DURATHERM© 1 or 2 micro switches, 1-pole changing contacts adjustable by reference value scale smallest adjustable value: approx. 5% FS approx. 2.5% of FS U~max. =250VAC Imax.=5A U=max. = 30 V DC Imax.= 0.4 A Pmax.=250VA Pmax.=10 W Switch 1 Switch 2 prewired numbered cable, cable terminal box, 7-pole plug connection connection shank G1⁄2 B DIN EN 837 aluminium GkAlSi10(Mg), varnished black aluminium GkAlSi10(Mg) HART-COAT© stainless steel 1.4305 diaphragm and gaskets of NBR or Viton© diaphragm of DURATHERM© Ni Cr Co-alloy stainless steel 1.4310, 1.4305 macrolon pressure chamber of Al = 1.2 kg, pressure chamber of 1.4305 = 3.5 kg type examination according to the rules of 'Germanischer Lloyd' possible according to applicable regulations pipe mounting: wall mounting: panel mounting: connection shank per DIN EN 837 bottom or rear pressure connection 3 fastening elements, bottom pressure connection with front ring ø 132 mm, bottom or rear pressure connection (accessory DZ11)

The DS 35 can be used for limit detection of pressure, underpressure or differential pressure. In differential pressure limit detection applications,
the DS Series are used primarily for filter condition monitoring in airconditioning and ventilation systems.

Fischer DE25 Differential pressure transmitter, DE25 is a differential pressure transmitter with a 3-wire electrical interface. It is suitable for accurate measurement of positive / negative gauge pressure or differential pressure of air. The instrument is based on resistive sensor element and can measure positive gauge, negative gauge or differential pressure.

Gas Alarm India offer Fischer DE28 differential pressure transmitter for liquid and gas media for overpressure, partial vacuum and differential pressure monitoring. Measuring Transmitter for overpressure, partial vacuum and differential pressure of liquid and aerial media. Ranges: 0-0.4 up to 0-6 bar. This series of transmitter is suitable for various measuring applications in the field of industrial and sanitary techniques.

Available for hazardous zone application, zone 1, zone 2 with ATEX certification Fischer DE 38 is a multi-function field mounted pressure instrument that combines a digital readout, transmitter and dual limit detection relays. It can be used for  measurement and control of positive or negative gauge pressure, differential pressure, flow and level. It is compatible for use with relatively clean and non-corrosive or liquids.

The DE44 is a dual-sensor multifunction pressure instrument that combines a digital readout, dual limit detection relays and optional transmitter output. It can measure positive gauge, negativegauge or differential pressure of two independent gas/air pressure sources

The DE 45 is a multi-function pressure in-strument that combines a digital readout,dual limit detection relays, and optional transmitter output. 

The DE46 is a multi-function differential pressure switch with an optional transmitter signal output. It is suitable for accurate measurement of low positive/negative gauge pressure or differential pressure of air